 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GU (General Use) Type [2-Channel (Form A Form B) Type] FEATURES 9.78 .385 6.4 .252 3.90.2 .154.008 6.4 .252 3.60.2 .142.008 PhotoMOS RELAYS 7. Eliminates the need for a power supply to drive the power MOSFET 8. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion (Typical 100 pA at 400 V) 9. Stable on resistance 9.78 .385 mm inch 1 2 3 4 N.O. N.C. 8 7 6 5 1. Approx. 1/2 the space compared with the mounting of a set of 1 Form A and 1 Form B photoMOS relays 2. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use 3. Low thermal electromotive force (Approx. 1 V) 4. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 5. Controls load currents up to 0.13 A with an input current of 5 mA with load voltage of 400 V 6. High speed switching: operate time of 300 s typical. TYPICAL APPLICATIONS * High-speed inspection machines * Telephone equipment * Computer TYPES Output rating* Type Through hole terminal Load voltage Load current Tube packing style Part No. Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQW614AX AQW614AZ Packing quantity Tube 1 tube contains 40 pcs. 1 batch contains 400 pcs. Tape and reel AC/DC type 400 V 100 mA AQW614 AQW614A 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATINGS 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage Continuous load current Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Operating Storage Topr Tstg AQW614(A) 50 mA 3V 1A 75 mW 400 V 0.1 A (0.13 A) 0.3 A 800 mW 850 mW 1,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Remarks Input f = 100 Hz, Duty factor = 0.1% Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel 100 ms (1 shot), VL = DC Between input and output/between contact sets Non-condensing at low temperatures 78 AQW614 2. Electrical characteristics (Ambient temperature: 25C 77F) Item LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum Typical Maximum Symbol IFon (N.O.) IFoff (N.C.) IFoff (N.O.) IFon (N.C.) VF AQW614 0.7 mA (N.O.) 0.9 mA (N.C.) 3 mA 0.4 mA 0.7 mA (N.O.) 0.8 mA (N.C.) 1.14 V (1.25 V at IF = 50 mA) 1.5 V 27 50 1 A 0.28 ms (N.O.) 0.43 ms (N.C.) 1 ms 0.04 ms (N.O.) 0.3 ms (N.C.) 1 ms 0.8 pF 1.5 pF 1,000 M Condition IL = 100 mA IL = 100 mA IF = 5 mA IF = 5 mA (N.O.) IF = 0 mA (N.C.) IL = 100 mA within 1 s on time IF = 0 mA (N.O.) IF = 5 mA (N.C.) VL = 400 V IF = 0 mA 5 mA IL = 100 mA IF = 5 mA 0 mA IL = 100 mA f = 1 MHz VB = 0 500 V DC On resistance Output Off state leakage current Operate (OFF) time* Transfer characteristics Reverse (ON) time* I/O capacitance Initial I/O isolation resistance *Operate/Reverse time 1) N.O. Input Ron Maximum Typical Maximum Typical Maximum Typical Maximum Minimum ILeak Ton (N.O.) Toff (N.C.) Toff (N.O.) Ton (N.C.) Ciso Riso Note: Recommendable LED forward current IF = 5 mA. For type of connection, see page 32. 2) N.C. Input 90% Output Ton Toff Toff Ton 10% Output 10% 90% REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F 120 100 Load current, mA On resistance, 80 60 40 20 0 -40 2. On resistance vs. ambient temperature characteristics Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 60 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 50 40 30 20 10 0 3. Operate (OFF) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 1.0 0.8 0.6 0.4 0.2 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Operate (OFF) time, ms -20 0 20 40 60 8085 100 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 79 AQW614 4. Reverse (ON) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 LED operate (OFF) current, mA Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Reverse (ON) time, ms 1.0 0.8 0.6 0.4 0.2 0 5. LED operate (OFF) current vs. ambient temperature characteristics Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 6 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 5 4 3 2 1 0 6. LED reverse (ON) current vs. ambient temperature characteristics Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 6 LED reverse (NO) current, mA 5 4 3 2 1 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) -40 -20 0 20 40 60 8085 -40 -20 Ambient temperature, C 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics LED current: 5 to 50 mA 1.5 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Current, mA Between terminal 7 and 8 100 (N.C.) 80 60 40 Between terminal 5 and 6 (N.O.) 12345 -20 Voltage, V -40 -60 -80 -100 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 1.4 1.3 1.2 1.1 1.0 0 Off state leakage current, A 10 -3 LED dropout voltage, V 20 -5 -4 -3 -2 -1 50mA 30mA 20mA 10mA 5mA 10 -6 Between terminal 7 and 8 (N.C.) 10 -9 Between terminal 5 and 6 (N.O.) 10 -12 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 20 40 60 80 100 Load voltage, V 10. LED forward current vs. operate (OFF) time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 3.0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Operate (OFF) time, ms 2.5 2.0 1.5 1.0 0.5 0 11. LED forward current vs. reverse (ON) time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 0.6 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 120 Output capacitance, pF Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 100 80 60 40 20 0 Reverse (ON) time, ms 10 20 30 40 50 LED forward current, mA 60 0.5 0.4 0.3 0.2 0.1 0 10 20 30 40 50 LED forward current, mA 60 10 20 30 40 50 Applied voltage, V 60 5/7/2001 80 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. |
Price & Availability of AQW614
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |